Polyethylene Balls (Low Density)

Polyethylene Balls (Low Density) is an FDA approved plastic. It is lightweight and soft.

See polyethylene balls (high density) balls for comparison.

 

Physical Properties

Specific Gravity 0.91
Water Absorption (Method A, 24hr)% —–
Tensile Strength at Yield, 100 psi 1.35
Elongated at Yield, % 590
Elastic Modulus In Tension, 10 to the 5th power psi —–
Flexural Strength in Tension, 10 to the 5th power psi —–
Elastic Modulus in Flexure, 10 to the 5th power psi —–
Compressive Strength at Yield, 1000 psi —–
Rockwell Hardness (Method A) R10
Maximum Service Temperature in °F 120
Natural Color milky white
Color Possibilities unlimited
Clarity translucent to opaque

The information on this web site is intended for guidance only. Since we gathered technical data from various technical sources, the actual mechanical and physical properties will vary from one lot of material to the next. Therefore, we accept no liability for deficiencies or damages arising from the use of this data, and customers should determine the suitability of a material or product by conducting practical tests under realistic conditions.