Hastelloy C-276 Balls

Hastelloy balls are resistant to strong oxidizing agents such as free chlorine and aqueous solutions of ferric and cupric salts.

Hastelloy exhibits excellent resistance to the following types of acids:

  • Acetic
  • Formic
  • Hydrochloric
  • Hydrofluoric
  • Nitric
  • Phosphoric
  • Sulfuric

Hastelloy is highly resistant to mixtures of zinc and ammonium chlorides. It is also used extensively in check valves where resistance to corrosion and wear is critical.

 

Material Analysis

Chromium 14.5/16.5
Carbon 0.02% max.
Molybdenum 15/17
Silicon 0.8% max.
Manganese 1% max.
Iron 4/7%
Nickel Balance
Tungsten 3.0/4.5
Cobalt 2.50% max.
Copper —–

 

Mechanical Properties

Tensile strength 114 Kpsi
Yield strength 52 Kpsi
Elongation in two inches 61%
Density 0.333 lbs/cubic inch

The information on this web site is intended for guidance only. Since we gathered technical data from various technical sources, the actual mechanical and physical properties will vary from one lot of material to the next. Therefore, we accept no liability for deficiencies or damages arising from the use of this data, and customers should determine the suitability of a material or product by conducting practical tests under realistic conditions.